HomelabWatts

Cost to run a MikroTik CRS328 switch

A MikroTik CRS328 switch (Network switch) draws roughly 12 W at idle and up to 28 W under load. Run 24/7 at a typical ~17 W and the US average of $0.17/kWh, it uses about 149 kWh a year and costs roughly $25.32/year ($2.11/month). In higher-priced regions such as Germany (€0.40/kWh) the same device costs about €59.57/year. Adjust the calculator for your own draw and electricity price.

Source: HomelabWatts wattage database. Data as of 2026-06-13.

Managed 24-port + SFP+ switch common in budget homelab racks.

Estimating running cost for MikroTik CRS328 switch. Adjust any value below.

Energy / month
Cost / month
Cost / year
CO₂ / year

Estimate only. Real draw varies with load, PSU efficiency and attached drives.

Idle vs load running cost

Annual cost at the US average of $0.17/kWh, assuming the device runs continuously.
ScenarioPowerEnergy / yearCost / year (US)
Idle12 W105 kWh$17.87
Typical 24/717 W149 kWh$25.32
Full load28 W245 kWh$41.70

Non-PoE base draw. SFP+ transceivers add roughly 1-1.5 W each. Source: HomelabWatts wattage database, data as of 2026-06-13.

Cost by region (typical 24/7 draw)

Estimated cost of running a MikroTik CRS328 switch at ~17 W continuously.
RegionPrice/kWhCost / monthCost / year
United States (avg residential)$0.17$2.11$25.32
Germany€0.40€4.96€59.57
France€0.28€3.47€41.70
United Kingdom£0.25£3.10£37.23
Spain€0.25€3.10€37.23

Prices from electricity price presets (EIA / Eurostat), data as of 2026-06-01. Excludes standing charges and taxes.

Frequently asked questions

How much does it cost to run a MikroTik CRS328 switch per year?

At a typical 24/7 draw of about 17 W and the US average of $0.17/kWh, roughly $25.32 per year ($2.11/month). At €0.40/kWh in Germany it is about €59.57. Use the calculator above for your own price.

How many watts does a MikroTik CRS328 switch use?

Approximately 12 W at idle and up to 28 W under load. Non-PoE base draw. SFP+ transceivers add roughly 1-1.5 W each.

Are these figures measured or estimated?

Estimated. They are compiled from manufacturer specifications and community wall-meter measurements; your exact draw depends on configuration, firmware and attached storage. Measure at the wall for a precise figure.

Related devices

Last updated: 2026-06-13